CPVC Pipe Installation Guide

There are a collection of things that might cause an outside leak at a home and while this isn’t especially tricky to repair it is one of the most menacing difficulties for the average home-owner to disentangle all alone. Here there is a way that will help you identify and fix a problem like this in the event that you are challenged by this issue.

1. Trace the key waterline from the meter to your house. If you walk along the line that your most crucial water line travels as it makes its way from your water meter at the street to the inside of your house, you’re likely come across a part of the ground that’s much wetter and softer than the other part of the lawn. Now clearly you’re going to need to wait to try this test if you’ve had current rain but generally this is a good way to find a probable leak. When you find the leak you’re going to need to open up the ground at around the central point of the wet area.

2. Find the leak and when you have found the leak after digging up the earth round the pipe you may then begin the correction process.

3. Turn the water off at the key shutoff valve at the street. You may be able to take two pliers and turn the valve at the water meter to close off the water to your house. Once you’ve turned off the water you can cut the pipe round the leak and make the renovation.

4. Use a compression connector to replace the damaged part of the water line. While this is definitely not the argument for everyone this may be true for the majority of houses built in the last twenty years. A compression coupling can be bought at any local store and is extraordinarily easy to link to the water line.

5. Turn the water back on and test the restoration. Once you complete the installation of the compression coupling you will want to turn the water on and let it run for a day or so. Come back and make sure that there are no leaks after 24 hours and then re-bury the water line.

Author
Recent Posts

Nikki